Our manufactured lumber is certified (cert. No. 1325-CPR-3641) and meets the safety and quality requirements set out in EN14081-1:2005+A1:2011. Lumber is visually graded according to compliance classes and is assigned strength classes (C14; C18; C24; C30) for load-bearing structures. The 2+ production process control assessment system is applied to our manufactured materials.
All lumber is impregnated with "Boechemit Basic" using the deep soaking method, which provides protection against wood fungi and wood rodents and gives it fire protection group II.
We manufacture any kind of spruce and pine lumber - beams, boards and laths - for wooden building frames (posts, floor beams, roof rafters, lathing, ties and other wooden structures) for construction purposes.
Saematerjal ja ehituspuit: Viimistluspuit
SIA "Akords U" produces and sells various sizes of softwood, alder and aspen finishing boards.
Our manufactured lumber is certified (cert. No. 1325-CPR-3641) and meets the safety and quality requirements set out in EN14081-1:2005+A1:2011. Lumber is visually graded according to compliance classes and is assigned strength classes (C14; C18; C24; C30) for load-bearing structures. The 2+ production process control assessment system is applied to our manufactured materials.
All lumber is impregnated with "Boechemit Basic" using the deep soaking method, which provides protection against wood fungi and wood rodents and gives it fire protection group II.
We manufacture any kind of spruce and pine lumber - beams, boards and laths - for wooden building frames (posts, floor beams, roof rafters, lathing, ties and other wooden structures) for construction purposes.
Saematerjal ja ehituspuit: Hööveldatud lauad
SIA "Akords U" produces and sells calibrated lumber.
Quality requirements for spruce stand-dried, scrap:
Tolerates: Dried, deer-gnawed, blued, curvature up to 3%, unlimited number of branches and their diameter, depth of longitudinal cracks up to 2cm, insect damage.
Tolerates: Dried, deer-gnawed, blued, curvature up to 3%, unlimited number of branches and their diameter, depth of longitudinal cracks up to 2cm, insect damage.
Dislikes: metal inclusions, dross.
Measuring by the thin end of the log
Küpsised
See veebisait kasutab toimimiseks vajalikke küpsiseid. Teie nõusolekul võidakse sellel veebisaidil kasutada täiendavaid statistika- ja sotsiaalmeediaküpsiseid.