Saematerjal ja ehituspuit: Prussid

SIA “Vēvers” manufactures and sells window and structural beams.

When producing window frames, both fixed (FIX) and lengthwise grown (FJ) lamellas (preforms) are used, without knots and without defects. The moisture content of the blanks after drying is 12% (+/- 2%). Toothed growth areas are visible on the wide edge of the frame. To ensure high quality of the bonding area, D4 polyurethane-based two-component adhesive is used.

The price of the beams depends on the order volume and the required beam size.

For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv

Saematerjal ja ehituspuit: Liimpuit, puitplaadid

SIA “Vēvers” produces and sells pine wood panels.

Pine wood boards are grown lengthwise and glued widthwise. For gluing boards, individual lamellas with a width of 24-60 mm are mainly used. After growing, they are planed and after gluing, they are carefully sanded. The moisture content of the blanks after drying is 12% +/- 2%. The growth line is visible on the surface of the board. Glue (D4) is used for growing, which guarantees high quality of the connection.

For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv

Saematerjal ja ehituspuit: Katusematerjalid

SIA “Vēvers” manufactures and sells theater battens.

Theater battens of various sizes are glued from long-grown, branchless blanks. The surface of the batten is continuous and contains at least one glue seam and its wide edges. The humidity of the blanks after drying is 12% (+/- 2%). After gluing, all surfaces are planed smoothly, and the edges are rounded. A small amount of blueing, resin or cores is allowed for theater battens. The material is resistant to deformation.

For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv

Küttematerjalid: Puitbrikett

SIA “Vēvers” produces and sells wood chip briquettes.

Woodchip briquettes are a high-quality and energy-efficient 100% natural fuel material that is produced only from pine wood chips without using any additional binders.

WHY CHOOSE TO BUILD WITH BRIQUETTES?

  • pure, 100% organic product
  • without binders
  • made from 100% pine chips
  • complete combustion, leaving a minimal amount of ash
  • high heat capacity and high calorific value
  • uniform heat output
  • compact and easily transportable material
  • easy to use

Since chip briquettes are a compact and dense product, their volume is smaller than that of firewood:

  • 1 ton of briquettes takes up approximately 1.2 m3
  • 1 ton of firewood takes up approximately 3.3 m3

TECHNICAL SPECIFICATIONS OF BRICKETS

In cooperation with the Institute of Environmental Protection and Heat Systems of Riga Technical University, briquette analysis was performed in accordance with the standard NE 14961-1:2008.5

Results obtained:

  • width: 60 mm, length: 15 mm, height 40 – 105 mm,
  • total moisture content – 7.3 wt% (CEN/TS 14774-3),
  • ash content (at 550 ̊C) – 0.5 wt%, d (CEN/TS 14918)
  • highest calorific value for dry mass – 21.61 MJ/kg (CEN/TS 14918)

ORDER https://www.vevers.eu/pasutijumi

For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv

Puidujäägid / kõrvalsaadused: Saepuru

SIA “Vēvers” sells wood chips.

During the woodworking process, more than 500 m3 of chips are produced in the workshops every month. They consist of 100% pine material. It is possible to purchase planed chips and sawdust.

Chips can be used for various purposes:

  • as fuel,
  • in the production of particle boards,
  • in the production of chip briquettes,
  • in the production of fuel pellets,
  • in agriculture and horticulture and elsewhere.

ORDER https://www.vevers.eu/pasutijumi

For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv

Puidujäägid / kõrvalsaadused: Energiapuit / küttehake

SIA “Vēvers” sells fuel wood chips.

Wood chips are a high-value wood processing by-product that is produced by grinding up sawn timber scraps.

Wood chips have many uses:

  • as a high-quality fuel in special boiler furnaces,
  • in the production of particle boards,
  • in the production of chip briquettes,
  • biomass energy plants,
  • in agriculture, horticulture and elsewhere.
  • 1000 m3 of wood chips are produced per month.

ORDER https://www.vevers.eu/pasutijumi

For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv

Puidujäägid / kõrvalsaadused: Multš

SIA “Vēvers” sells pine bark mulch, which does not contain any chemical impurities.

Bark mulch can be used effectively in gardening; it improves the soil by increasing air and moisture capacity, and also reduces the growth of weeds in the soil.

ORDER https://www.vevers.eu/pasutijumi

For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv

Puidujäägid / kõrvalsaadused: Koor, puidujäägid

SIA “Vēvers” sells wooden blocks made from pine wood scraps.

ORDER https://www.vevers.eu/pasutijumi

For additional information, contact us at +371 25746346 , e-mail andis@vevers.lv

Küttematerjalid: Puidupelletid

SIA “Vēvers” sells wood pellets.

Saematerjal ja ehituspuit: Saelauad

SIA “Vēvers” sells lumber of various sizes.

Saepalgid: Mänd

SIA “Vēvers” purchases pine sawn logs at the Jaunmuižarāji sawmill.

Class Length Diameter Price
Class A 3.10 m and 6.10 m 26 cm+

Current purchase prices on the website

https://www.vevers.eu/apalkoku-ipirksana

Class I
Class II
Defect

Quality requirements

  • Class A: first or second cut (6.10 m first cut only) without branches.
  • Class 1: 1 branch per 1 m is allowed.

Unacceptable defects

  • blueness
  • troupe
  • insect damage
  • metallic inclusions
  • twin core
  • branchiness
  • stepson
  • dry-skinned
  • mechanical damage
  • cracks
  • farewell