SIA “VILSA” provides timber drying services.
We offer
SIA “Vilsa” has been engaged in timber drying since 2015.
It is possible to dry timber simultaneously in three chambers, with a total capacity of 180-220 m3.
Maximum material length 7.0 m.
Required packaging – timber must be packed in bundles, measuring 1.15*1.15 m, and packed on spacers, no less than 20 mm thick.
The full drying cycle, up to 18% moisture content, takes 5-10 days.
The duration of the cycle cannot be precisely determined in advance, as it depends on various wood parameters:
- wood structure and density,
- material thickness,
- initial humidity, etc.
Wood may crack and warp during drying; this is a natural process and cannot be avoided.
Timber drying
Drying timber is a standard process in woodworking factories to reduce the moisture level in wood, which fully allows for further processing of the materials.
By artificially drying wood in special chambers, the desired moisture level can be achieved in an incomparably shorter period of time than when wood is dried naturally.
The wood dryer operates in automatic mode. The moisture evaporates from the wood under the influence of hot air flow in the drying chamber.
The air flow temperature and humidity are electronically controlled during the process. The air flow inside the chamber is provided by special fans.
The heat supply in the drying chamber is provided by heaters, while air exchange in the chamber occurs through air exchange hatches. The humidity level in the drying chamber is provided by an injection system.
CONTACT US https://vilsa.lv/kontakti/
